INFO: Using directory: "1"
INFO: Using existing c-file: ./SOLEIL_ROCK.c
INFO: Using existing binary: ./SOLEIL_ROCK.out
INFO: ===
SOLEIL_ROCK: Energy=15.918 [keV]
	M2 mirror=Pd.dat
	Monochromator Si<2 2 0> angle 11.7022 [deg], config=0
[SOLEIL_ROCK] Initialize
Opening input file '/u/data/pkwi/McXtrace/mcxtrace/3.x-dev/data/Ir.dat' (Table_Read_Offset)
Opening input file '/u/data/pkwi/McXtrace/mcxtrace/3.x-dev/data/Pd.dat' (Table_Read_Offset)
INFO (reflectivity-lib)  reflectivity parameterization type: 'eth'
Opening input file '/u/data/pkwi/McXtrace/mcxtrace/3.x-dev/data/Si.txt' (Table_Read_Offset)
Opening input file '/u/data/pkwi/McXtrace/mcxtrace/3.x-dev/data/FormFactors.txt' (Table_Read_Offset)
Reusing input file 'Si.txt' (Table_Read_Offset)
Reusing input file 'FormFactors.txt' (Table_Read_Offset)
Reusing input file 'Pd.dat' (Table_Read_Offset)
INFO (reflectivity-lib)  reflectivity parameterization type: 'eth'
absorption_sample: Material CuMo mass fractions:
  |     40 %: Z= 29  Cu     63.5 [g/mol]     8.96 [g/cm3]
  |     60 %: Z= 42  Mo       96 [g/mol]     10.2 [g/cm3]
absorption_sample: Material CuMo M=159.49 [g/mol] density=9.71802 [g/cm3] rho=0.036694 [at/Angs-3]
Fluorescence: absorption_sample: The target is not defined. Using 4PI.

NOTE: CPU COMPONENT grammar activated:
 1) "FUNNEL" raytrace algorithm enabled.
 2) Any SPLIT's are dynamically allocated based on available buffer size. 


Save [SOLEIL_ROCK]
Detector: slit3_xy_I=2.33624e+13 slit3_xy_ERR=1.49557e+10 slit3_xy_N=2.4427e+06 "slit3_xy.dat"
Detector: slit3_div_I=2.33624e+13 slit3_div_ERR=1.49557e+10 slit3_div_N=2.4427e+06 "slit3_div.dat"
Detector: slit4_in_I=1.65808e+13 slit4_in_ERR=1.10638e+10 slit4_in_N=2.4427e+06 "slit4_in.dat"
Detector: bragg_crystal_out_I=3.55039e+09 bragg_crystal_out_ERR=1.49303e+08 bragg_crystal_out_N=2.39062e+06 "bragg_crystal_out.dat"
Detector: EnergyMonitor_before_sample_I=2.17514e+09 EnergyMonitor_before_sample_ERR=1.03004e+08 EnergyMonitor_before_sample_N=513226 "EnergyMonitor_before_sample.E"
Detector: e_repartition_after_m2b_I=2.17514e+09 e_repartition_after_m2b_ERR=1.03004e+08 e_repartition_after_m2b_N=636238 "e_repartition_after_m2b.E_y"
Detector: sample_in_I=2.02087e+09 sample_in_ERR=9.96293e+07 sample_in_N=1.82075e+06 "sample_in.dat"
Detector: fluo_monitor_I=1.11762e+09 fluo_monitor_ERR=5.01892e+07 fluo_monitor_N=4.78082e+06 "fluo_monitor_1729744921.E"
Detector: EnergyMonitor_after_sample_I=5.77883e+07 EnergyMonitor_after_sample_ERR=4.72133e+06 EnergyMonitor_after_sample_N=165993 "EnergyMonitor_after_sample.E"
Detector: psd_monitor_I=2.28441e+07 psd_monitor_ERR=2.95869e+06 psd_monitor_N=236632 "psd.dat"

Finally [SOLEIL_ROCK: 1]. Time: 2 [min] 
absorption_sample: scattered intensity: fluo=0 Compton=0 Rayleigh=0
INFO: Placing instr file copy SOLEIL_ROCK.instr in dataset 1
INFO: Placing generated c-code copy SOLEIL_ROCK.c in dataset 1