INFO: Using directory: "1"
INFO: Using existing c-file: ./Test_undulator.c
INFO: Using existing binary: ./Test_undulator.out
WARNING: Ignoring invalid parameter: "Test_undulator.instr"
INFO: ===
Simulation 'Test_undulator' (/home/nexmap/pkwi/xTESTS/2025-05-17/ANTLR_mpi_x_16_1e7_Linux_1e7/Test_undulator/Test_undulator.instr): running on 16 nodes (master is 'elearn1.fysik.dtu.dk', MPI version 3.1).
Test_undulator: energy interval: [ 0.585616 +- 0.205205 ] = [ 0.380411 : 0.790822 ]
[Test_undulator] Initialize
Undulator (src1) K=1 B=0.293418[T] lu=0.0365[m] E1st=0.390261[keV] E0=0.585616[keV] gap=0.0198976[m]
Test_undulator: energy interval: [ 0.585616 +- 0.205205 ] = [ 0.380411 : 0.790822 ]
[Test_undulator] Initialize
Undulator (src1) K=1 B=0.293418[T] lu=0.0365[m] E1st=0.390261[keV] E0=0.585616[keV] gap=0.0198976[m]
Test_undulator: energy interval: [ 0.585616 +- 0.205205 ] = [ 0.380411 : 0.790822 ]
[Test_undulator] Initialize
Undulator (src1) K=1 B=0.293418[T] lu=0.0365[m] E1st=0.390261[keV] E0=0.585616[keV] gap=0.0198976[m]
Test_undulator: energy interval: [ 0.585616 +- 0.205205 ] = [ 0.380411 : 0.790822 ]
[Test_undulator] Initialize
Undulator (src1) K=1 B=0.293418[T] lu=0.0365[m] E1st=0.390261[keV] E0=0.585616[keV] gap=0.0198976[m]
Test_undulator: energy interval: [ 0.585616 +- 0.205205 ] = [ 0.380411 : 0.790822 ]
[Test_undulator] Initialize
Undulator (src1) K=1 B=0.293418[T] lu=0.0365[m] E1st=0.390261[keV] E0=0.585616[keV] gap=0.0198976[m]
Test_undulator: energy interval: [ 0.585616 +- 0.205205 ] = [ 0.380411 : 0.790822 ]
[Test_undulator] Initialize
Undulator (src1) K=1 B=0.293418[T] lu=0.0365[m] E1st=0.390261[keV] E0=0.585616[keV] gap=0.0198976[m]
Test_undulator: energy interval: [ 0.585616 +- 0.205205 ] = [ 0.380411 : 0.790822 ]
[Test_undulator] Initialize
Undulator (src1) K=1 B=0.293418[T] lu=0.0365[m] E1st=0.390261[keV] E0=0.585616[keV] gap=0.0198976[m]
Test_undulator: energy interval: [ 0.585616 +- 0.205205 ] = [ 0.380411 : 0.790822 ]
[Test_undulator] Initialize
Undulator (src1) K=1 B=0.293418[T] lu=0.0365[m] E1st=0.390261[keV] E0=0.585616[keV] gap=0.0198976[m]
Test_undulator: energy interval: [ 0.585616 +- 0.205205 ] = [ 0.380411 : 0.790822 ]
[Test_undulator] Initialize
Undulator (src1) K=1 B=0.293418[T] lu=0.0365[m] E1st=0.390261[keV] E0=0.585616[keV] gap=0.0198976[m]
Test_undulator: energy interval: [ 0.585616 +- 0.205205 ] = [ 0.380411 : 0.790822 ]
[Test_undulator] Initialize
Undulator (src1) K=1 B=0.293418[T] lu=0.0365[m] E1st=0.390261[keV] E0=0.585616[keV] gap=0.0198976[m]
Test_undulator: energy interval: [ 0.585616 +- 0.205205 ] = [ 0.380411 : 0.790822 ]
[Test_undulator] Initialize
Undulator (src1) K=1 B=0.293418[T] lu=0.0365[m] E1st=0.390261[keV] E0=0.585616[keV] gap=0.0198976[m]
Test_undulator: energy interval: [ 0.585616 +- 0.205205 ] = [ 0.380411 : 0.790822 ]
[Test_undulator] Initialize
Undulator (src1) K=1 B=0.293418[T] lu=0.0365[m] E1st=0.390261[keV] E0=0.585616[keV] gap=0.0198976[m]
Test_undulator: energy interval: [ 0.585616 +- 0.205205 ] = [ 0.380411 : 0.790822 ]
[Test_undulator] Initialize
Undulator (src1) K=1 B=0.293418[T] lu=0.0365[m] E1st=0.390261[keV] E0=0.585616[keV] gap=0.0198976[m]
Test_undulator: energy interval: [ 0.585616 +- 0.205205 ] = [ 0.380411 : 0.790822 ]
[Test_undulator] Initialize
Undulator (src1) K=1 B=0.293418[T] lu=0.0365[m] E1st=0.390261[keV] E0=0.585616[keV] gap=0.0198976[m]
Test_undulator: energy interval: [ 0.585616 +- 0.205205 ] = [ 0.380411 : 0.790822 ]
[Test_undulator] Initialize
Undulator (src1) K=1 B=0.293418[T] lu=0.0365[m] E1st=0.390261[keV] E0=0.585616[keV] gap=0.0198976[m]
Test_undulator: energy interval: [ 0.585616 +- 0.205205 ] = [ 0.380411 : 0.790822 ]
[Test_undulator] Initialize
Undulator (src1) K=1 B=0.293418[T] lu=0.0365[m] E1st=0.390261[keV] E0=0.585616[keV] gap=0.0198976[m]
*** TRACE end *** 

Save [Test_undulator]
Detector: e_monitor_I=2.34965e+16 e_monitor_ERR=8.57605e+13 e_monitor_N=1e+07 "emon0.dat"
Detector: psd_monitor_I=5.75529e+15 psd_monitor_ERR=4.8477e+13 psd_monitor_N=1.59764e+06 "psd0.dat"
Detector: e_monitor1_I=1.9668e+14 e_monitor1_ERR=1.05365e+13 e_monitor1_N=33402 "emon1.dat"

Finally [Test_undulator: 1]. Time: 3 [s] 

Finally [Test_undulator: 1]. Time: 3 [s] 

Finally [Test_undulator: 1]. Time: 3 [s] 

Finally [Test_undulator: 1]. Time: 3 [s] 
Detector: psd_monitor1_I=1.9668e+14 psd_monitor1_ERR=1.05365e+13 psd_monitor1_N=33402 "psd1.dat"

Finally [Test_undulator: 1]. Time: 3 [s] 

Finally [Test_undulator: 1]. Time: 3 [s] 

Finally [Test_undulator: 1]. Time: 3 [s] 

Finally [Test_undulator: 1]. Time: 3 [s] 

Finally [Test_undulator: 1]. Time: 3 [s] 

Finally [Test_undulator: 1]. Time: 3 [s] 

Finally [Test_undulator: 1]. Time: 3 [s] 

Finally [Test_undulator: 1]. Time: 3 [s] 

Finally [Test_undulator: 1]. Time: 3 [s] 

Finally [Test_undulator: 1]. Time: 3 [s] 

Finally [Test_undulator: 1]. Time: 3 [s] 

Finally [Test_undulator: 1]. Time: 3 [s] 
INFO: Placing instr file copy Test_undulator.instr in dataset 1
INFO: Placing generated c-code copy Test_undulator.c in dataset 1