loading system configuration loading override configuration from /users/willend/mxtest/mctest/../mccodelib/mcxtrace-test/McXtrace_DUAL_A100_DMSC/mccode_config.json INFO: Using directory: "1" INFO: Using existing c-file: ./SOLEIL_ROCK.c INFO: Using existing binary: ./SOLEIL_ROCK.out INFO: === -------------------------------------------------------------------------- WARNING: No preset parameters were found for the device that Open MPI detected: Local host: r6n22 Device name: mlx5_0 Device vendor ID: 0x02c9 Device vendor part ID: 4123 Default device parameters will be used, which may result in lower performance. You can edit any of the files specified by the btl_openib_device_param_files MCA parameter to set values for your device. NOTE: You can turn off this warning by setting the MCA parameter btl_openib_warn_no_device_params_found to 0. -------------------------------------------------------------------------- Simulation 'SOLEIL_ROCK' (/users/willend/xTESTS/2022-12-01/McXtrace_DUAL_A100_DMSC_5e7/SOLEIL_ROCK/SOLEIL_ROCK.instr): running on 2 nodes (master is 'r6n22.esss.dk', MPI version 3.1). Have found 2 GPU devices on rank 1. Will use device 1. Have found 2 GPU devices on rank 0. Will use device 0. Warning (Source): Bending_magnet is an experimental component - testing is ongoing Energie 17 / Angle 6.67856[SOLEIL_ROCK] Initialize Energie 17 / Angle 6.67856[SOLEIL_ROCK] Initialize Warning (Source): Bending_magnet is an experimental component - testing is ongoing Opening input file '/users/willend/McXtrace/mcxtrace/3.x-dev/tools/Python/mxrun/../mccodelib/../../../data/Ir.dat' (Table_Read_Offset) INFO (reflectivity-lib) reflectivity parameterization type: 'eth' INFO (reflectivity-lib) reflectivity parameterization type: 'eth' Opening input file '/users/willend/McXtrace/mcxtrace/3.x-dev/tools/Python/mxrun/../mccodelib/../../../data/Pt.dat' (Table_Read_Offset) INFO (reflectivity-lib) reflectivity parameterization type: 'eth' INFO (reflectivity-lib) reflectivity parameterization type: 'eth' Opening input file '/users/willend/McXtrace/mcxtrace/3.x-dev/tools/Python/mxrun/../mccodelib/../../../data/Si.txt' (Table_Read_Offset) Opening input file '/users/willend/McXtrace/mcxtrace/3.x-dev/tools/Python/mxrun/../mccodelib/../../../data/FormFactors.txt' (Table_Read_Offset) INFO (reflectivity-lib) reflectivity parameterization type: 'eth' Reusing input file 'Si.txt' (Table_Read_Offset) Reusing input file 'FormFactors.txt' (Table_Read_Offset) Reusing input file 'Pt.dat' (Table_Read_Offset) INFO (reflectivity-lib) reflectivity parameterization type: 'eth' Warning: absorption_sample: Invalid inner volume specification. Ignoring. Warning: absorption_sample: Invalid inner volume specification. Ignoring. Opening input file '/users/willend/McXtrace/mcxtrace/3.x-dev/tools/Python/mxrun/../mccodelib/../../../data/Cu.txt' (Table_Read_Offset) Reusing input file 'Cu.txt' (Table_Read_Offset) Opening input file '/users/willend/McXtrace/mcxtrace/3.x-dev/tools/Python/mxrun/../mccodelib/../../../data/Mo.txt' (Table_Read_Offset) *** TRACE end *** Save [SOLEIL_ROCK] Detector: EnergyMonitor_before_sample_I=1.67982e+08 EnergyMonitor_before_sample_ERR=7.68892e+06 EnergyMonitor_before_sample_N=475612 "EnergyMonitor_before_sample.E" Detector: e_repartition_after_m2b_I=1.36406e+08 e_repartition_after_m2b_ERR=6.71184e+06 e_repartition_after_m2b_N=157286 "e_repartition_after_m2b.E_y" Detector: EnergyMonitor_after_sample_I=1.48568e+06 EnergyMonitor_after_sample_ERR=67964.1 EnergyMonitor_after_sample_N=475612 "EnergyMonitor_after_sample.E" Detector: psd_monitor_I=1.20872e+06 psd_monitor_ERR=59469.9 psd_monitor_N=8.33931e+06 "psd.dat" Finally [SOLEIL_ROCK: 1]. Time: 2 [s] Finally [SOLEIL_ROCK: 1]. Time: 2 [s] [r6n22.esss.dk:3410880] 1 more process has sent help message help-mpi-btl-openib.txt / no device params found [r6n22.esss.dk:3410880] Set MCA parameter "orte_base_help_aggregate" to 0 to see all help / error messages INFO: Placing instr file copy /users/willend/xTESTS/2022-12-01/McXtrace_DUAL_A100_DMSC_5e7/SOLEIL_ROCK/SOLEIL_ROCK.instr in dataset 1