loading system configuration
loading override configuration from /users/willend/mxtest/mctest/../mccodelib/mcxtrace-test/McXtrace_DUAL_A100_DMSC/mccode_config.json
INFO: Using directory: "1"
INFO: Using existing c-file: ./SOLEIL_ANATOMIX.c
INFO: Using existing binary: ./SOLEIL_ANATOMIX.out
INFO: ===
--------------------------------------------------------------------------
WARNING: No preset parameters were found for the device that Open MPI
detected:

  Local host:            r6n22
  Device name:           mlx5_0
  Device vendor ID:      0x02c9
  Device vendor part ID: 4123

Default device parameters will be used, which may result in lower
performance.  You can edit any of the files specified by the
btl_openib_device_param_files MCA parameter to set values for your
device.

NOTE: You can turn off this warning by setting the MCA parameter
      btl_openib_warn_no_device_params_found to 0.
--------------------------------------------------------------------------
Simulation 'SOLEIL_ANATOMIX' (/users/willend/xTESTS/2022-12-01/McXtrace_DUAL_A100_DMSC_5e7/SOLEIL_ANATOMIX/SOLEIL_ANATOMIX.instr): running on 2 nodes (master is 'r6n22.esss.dk', MPI version 3.1).
Have found 2 GPU devices on rank 0. Will use device 0.
Have found 2 GPU devices on rank 1. Will use device 1.
SOLEIL_ANATOMIX: Monochromator energy=17 [keV], angle=6.67856 [deg]
[SOLEIL_ANATOMIX] Initialize
SOLEIL_ANATOMIX: Monochromator energy=17 [keV], angle=6.67856 [deg]
[SOLEIL_ANATOMIX] Initialize
Monitor_nD: e_repartition_before_cc is using automatic limits option 'auto' together with MPI.
WARNING     this may create incorrect distributions (but integrated flux will be right).
Opening input file '/users/willend/McXtrace/mcxtrace/3.x-dev/tools/Python/mxrun/../mccodelib/../../../data/Si.txt' (Table_Read_Offset)
Opening input file '/users/willend/McXtrace/mcxtrace/3.x-dev/tools/Python/mxrun/../mccodelib/../../../data/FormFactors.txt' (Table_Read_Offset)
Reusing input file 'Si.txt' (Table_Read_Offset)
Reusing input file 'FormFactors.txt' (Table_Read_Offset)
Loading geometry file (OFF/PLY): wire.ply
  Number of vertices: 2584
  Number of polygons: 5438
  Bounding box dimensions for geometry wire.ply:
    Length=0.020000 (11.530%)
    Width= 0.008997 (11.530%)
    Depth= 0.016806 (11.530%)
Opening input file '/users/willend/McXtrace/mcxtrace/3.x-dev/tools/Python/mxrun/../mccodelib/../../../data/Be.txt' (Table_Read_Offset)
WARNING: (Table_Rebin): Rebinning table from Be.txt would exceed 1M rows. Skipping.
sample: Rebinning material data (Be.txt) for faster tracing...done
WARNING: (Table_Rebin): Rebinning table from Be.txt would exceed 1M rows. Skipping.
sample: Rebinning material data (Be.txt) for faster tracing...done

NOTE: CPU COMPONENT grammar activated:
 1) "FUNNEL" raytrace algorithm enabled.
 2) Any SPLIT's are dynamically allocated based on available buffer size. 
[r6n22.esss.dk:3410348] 1 more process has sent help message help-mpi-btl-openib.txt / no device params found
[r6n22.esss.dk:3410348] Set MCA parameter "orte_base_help_aggregate" to 0 to see all help / error messages



Save [SOLEIL_ANATOMIX]
Detector: e_repartition_before_cc_I=2.69082e+11 e_repartition_before_cc_ERR=4.7131e+07 e_repartition_before_cc_N=5e+07 "e_repartition_before_cc.E_y"
Detector: psd_monitor_before_cc_I=2.69082e+11 psd_monitor_before_cc_ERR=4.7131e+07 psd_monitor_before_cc_N=5e+07 "psd_monitor_before_cc.dat"
Detector: psd_after_cc_I=1.89842e+08 psd_after_cc_ERR=1.13415e+06 psd_after_cc_N=5e+07 "psd_after_cc2.dat"
Detector: e_monitor_before_sample_I=1.89842e+08 e_monitor_before_sample_ERR=1.13415e+06 e_monitor_before_sample_N=5e+07 "e_monitor_before_sample.dat"
Detector: psd_repartition_after_cc_I=1.89842e+08 psd_repartition_after_cc_ERR=1.13415e+06 psd_repartition_after_cc_N=5e+07 "psd_repartition_after_cc.dat"
Detector: e_monitor_after_sample_I=4.32038e+07 e_monitor_after_sample_ERR=540234 e_monitor_after_sample_N=1.16435e+07 "e_monitor_after_sample.dat"

Finally [SOLEIL_ANATOMIX: 1]. Time: 48 [s] 
Detector: psd_monitor_after_cc_I=4.32013e+07 psd_monitor_after_cc_ERR=540230 psd_monitor_after_cc_N=1.16402e+07 "psd_monitor_after_sample.dat"

Finally [SOLEIL_ANATOMIX: 1]. Time: 48 [s] 
INFO: Placing instr file copy /users/willend/xTESTS/2022-12-01/McXtrace_DUAL_A100_DMSC_5e7/SOLEIL_ANATOMIX/SOLEIL_ANATOMIX.instr in dataset 1