loading system configuration
loading override configuration from /users/willend/mxtest/mctest/../mccodelib/mcxtrace-test/McXtrace_DUAL_A100_DMSC/mccode_config.json
INFO: Using directory: "1"
INFO: Using existing c-file: ./PBD_BT.c
INFO: Using existing binary: ./PBD_BT.out
INFO: ===
--------------------------------------------------------------------------
WARNING: No preset parameters were found for the device that Open MPI
detected:

  Local host:            r6n22
  Device name:           mlx5_0
  Device vendor ID:      0x02c9
  Device vendor part ID: 4123

Default device parameters will be used, which may result in lower
performance.  You can edit any of the files specified by the
btl_openib_device_param_files MCA parameter to set values for your
device.

NOTE: You can turn off this warning by setting the MCA parameter
      btl_openib_warn_no_device_params_found to 0.
--------------------------------------------------------------------------
Simulation 'PBD_BT' (/users/willend/xTESTS/2022-12-01/McXtrace_DUAL_A100_DMSC_5e7/PBD_BT/PBD_BT.instr): running on 2 nodes (master is 'r6n22.esss.dk', MPI version 3.1).
Have found 2 GPU devices on rank 0. Will use device 0.
Have found 2 GPU devices on rank 1. Will use device 1.
mirror vertex=(-0.004,-0.100), focal length (mm)= 0.041 
monochromator angle, alpha = 23.650930, -20.650930
mirror vertex=(-0.004,-0.100), focal length (mm)= 0.041 
monochromator angle, alpha = 23.650930, -20.650930
[PBD_BT] Initialize
[PBD_BT] Initialize
Opening input file '/users/willend/McXtrace/mcxtrace/3.x-dev/tools/Python/mxrun/../mccodelib/../../../data/Cu.txt' (Table_Read_Offset)
Opening input file '/users/willend/McXtrace/mcxtrace/3.x-dev/tools/Python/mxrun/../mccodelib/../../../data/Si.txt' (Table_Read_Offset)
Opening input file '/users/willend/McXtrace/mcxtrace/3.x-dev/tools/Python/mxrun/../mccodelib/../../../data/FormFactors.txt' (Table_Read_Offset)
Reusing input file 'Si.txt' (Table_Read_Offset)
Reusing input file 'FormFactors.txt' (Table_Read_Offset)
Reusing input file 'Si.txt' (Table_Read_Offset)
Reusing input file 'FormFactors.txt' (Table_Read_Offset)
Reusing input file 'Si.txt' (Table_Read_Offset)
Reusing input file 'FormFactors.txt' (Table_Read_Offset)
Reusing input file 'Si.txt' (Table_Read_Offset)
Reusing input file 'FormFactors.txt' (Table_Read_Offset)
Reusing input file 'Si.txt' (Table_Read_Offset)
Reusing input file 'FormFactors.txt' (Table_Read_Offset)
Reusing input file 'Si.txt' (Table_Read_Offset)
Reusing input file 'FormFactors.txt' (Table_Read_Offset)
Reusing input file 'Si.txt' (Table_Read_Offset)
Reusing input file 'FormFactors.txt' (Table_Read_Offset)
Reusing input file 'Si.txt' (Table_Read_Offset)
Reusing input file 'FormFactors.txt' (Table_Read_Offset)
Reusing input file 'Si.txt' (Table_Read_Offset)
Reusing input file 'FormFactors.txt' (Table_Read_Offset)
*** TRACE end *** 

Save [PBD_BT]
Detector: mirror_psd_I=1.25415e+16 mirror_psd_ERR=2.63801e+12 mirror_psd_N=5e+07 "mirror.psd"
Detector: first_crystal_spect_I=0 first_crystal_spect_ERR=0 first_crystal_spect_N=0 "mono_1_spect.dat"
Detector: incoming_spectrum_mon_I=0 incoming_spectrum_mon_ERR=0 incoming_spectrum_mon_N=0 "mono_all_spect.dat"
Detector: spectrum_mon_I=0 spectrum_mon_ERR=0 spectrum_mon_N=0 "emon.dat"

Finally [PBD_BT: 1]. Time: 0 [s] 
Detector: camera_I=0 camera_ERR=0 camera_N=0 "psd_1.dat"

Finally [PBD_BT: 1]. Time: 0 [s] 
[r6n22.esss.dk:3410033] 1 more process has sent help message help-mpi-btl-openib.txt / no device params found
[r6n22.esss.dk:3410033] Set MCA parameter "orte_base_help_aggregate" to 0 to see all help / error messages
INFO: Placing instr file copy /users/willend/xTESTS/2022-12-01/McXtrace_DUAL_A100_DMSC_5e7/PBD_BT/PBD_BT.instr in dataset 1