loading system configuration
loading override configuration from /users/willend/mxtest/mctest/../mccodelib/mcxtrace-test/McXtrace_DUAL_A100_DMSC/mccode_config.json
INFO: Using directory: "1"
INFO: Using existing c-file: ./ESRF_ID01.c
INFO: Using existing binary: ./ESRF_ID01.out
WARNING: Ignoring invalid parameter: "ESRF_ID01.instr"
INFO: ===
--------------------------------------------------------------------------
WARNING: No preset parameters were found for the device that Open MPI
detected:

  Local host:            r6n22
  Device name:           mlx5_0
  Device vendor ID:      0x02c9
  Device vendor part ID: 4123

Default device parameters will be used, which may result in lower
performance.  You can edit any of the files specified by the
btl_openib_device_param_files MCA parameter to set values for your
device.

NOTE: You can turn off this warning by setting the MCA parameter
      btl_openib_warn_no_device_params_found to 0.
--------------------------------------------------------------------------
Simulation 'ESRF_ID01' (/users/willend/xTESTS/2022-12-01/McXtrace_DUAL_A100_DMSC_5e7/ESRF_ID01/ESRF_ID01.instr): running on 2 nodes (master is 'r6n22.esss.dk', MPI version 3.1).
Have found 2 GPU devices on rank 1. Will use device 1.
Have found 2 GPU devices on rank 0. Will use device 0.
Target wavelength is 1.5498 AA. 
The monochromators will be rotated by 14.3078 degrees. 
[ESRF_ID01] Initialize
Target wavelength is 1.5498 AA. 
The monochromators will be rotated by 14.3078 degrees. 
[ESRF_ID01] Initialize
Opening input file '/users/willend/McXtrace/mcxtrace/3.x-dev/tools/Python/mxrun/../mccodelib/../../../data/Si.txt' (Table_Read_Offset)
Opening input file '/users/willend/McXtrace/mcxtrace/3.x-dev/tools/Python/mxrun/../mccodelib/../../../data/FormFactors.txt' (Table_Read_Offset)
Reusing input file 'Si.txt' (Table_Read_Offset)
Reusing input file 'FormFactors.txt' (Table_Read_Offset)
Opening input file '/users/willend/McXtrace/mcxtrace/3.x-dev/tools/Python/mxrun/../mccodelib/../../../data/stretch_2orts.orts' (Table_Read_Offset)
Opening input file '/users/willend/McXtrace/mcxtrace/3.x-dev/tools/Python/mxrun/../mccodelib/../../../data/GeReduced.lau' (Table_Read_Offset)
Reusing input file 'Si.txt' (Table_Read_Offset)
Opening input file '/users/willend/McXtrace/mcxtrace/3.x-dev/tools/Python/mxrun/../mccodelib/../../../data/GeReduced.lau' (Table_Read_Offset)
Opening input file '/users/willend/McXtrace/mcxtrace/3.x-dev/tools/Python/mxrun/../mccodelib/../../../data/GeReduced.lau' (Table_Read_Offset)
*** TRACE end *** 

Save [ESRF_ID01]
Detector: DivergenceMonitor_I=3.4007e-05 DivergenceMonitor_ERR=9.0124e-08 DivergenceMonitor_N=2.55279e+06 "DivMonitor.dat"
Detector: EnergyMonitor_I=3.4007e-05 EnergyMonitor_ERR=9.0124e-08 EnergyMonitor_N=2.55279e+06 "EnergyMonitor.dat"
Detector: PSDMonitor_I=3.4007e-05 PSDMonitor_ERR=9.0124e-08 PSDMonitor_N=2.55279e+06 "PSDMonitor.dat"

Finally [ESRF_ID01: 1]. Time: 1 [s] 
Detector: MAXIPix_I=2.94811e-05 MAXIPix_ERR=8.39179e-08 MAXIPix_N=2.21193e+06 "DetectorMaxiPix.mcp"

Finally [ESRF_ID01: 1]. Time: 1 [s] 
[r6n22.esss.dk:3408365] 1 more process has sent help message help-mpi-btl-openib.txt / no device params found
[r6n22.esss.dk:3408365] Set MCA parameter "orte_base_help_aggregate" to 0 to see all help / error messages
INFO: Placing instr file copy /users/willend/xTESTS/2022-12-01/McXtrace_DUAL_A100_DMSC_5e7/ESRF_ID01/ESRF_ID01.instr in dataset 1