loading system configuration
loading override configuration from /zhome/89/0/38697/mxtest/mctest/../mccodelib/mcxtrace-test/McXtrace-1.x_CPU_MPICC/mccode_config.json
INFO: Using directory: "1"
INFO: Using existing c-file: ./Template_Johann_spec.c
INFO: Using existing binary: ./Template_Johann_spec.out
INFO: ===
INFO: Using system default number of mpirun -np processes
--------------------------------------------------------------------------
By default, for Open MPI 4.0 and later, infiniband ports on a device
are not used by default.  The intent is to use UCX for these devices.
You can override this policy by setting the btl_openib_allow_ib MCA parameter
to true.

  Local host:              n-62-29-31
  Local adapter:           mlx4_0
  Local port:              1

--------------------------------------------------------------------------
--------------------------------------------------------------------------
WARNING: There was an error initializing an OpenFabrics device.

  Local host:   n-62-29-31
  Local device: mlx4_0
--------------------------------------------------------------------------
Simulation 'Template_Johann_spec' (/zhome/89/0/38697/xTESTS/2022-12-01/McXtrace-1.x_CPU_MPICC_1e7/Template_Johann_spec/Template_Johann_spec.instr): running on 10 nodes (master is 'n-62-29-31', MPI version 3.1).
[Template_Johann_spec] Initialize
Component bc: starting up
Opening input file '/zhome/89/0/38697/McXtrace/mcxtrace/1.x-dev/tools/Python/mxrun/../mccodelib/../../../data/Si.txt' (Table_Read_Offset)
Opening input file '/zhome/89/0/38697/McXtrace/mcxtrace/1.x-dev/tools/Python/mxrun/../mccodelib/../../../data/FormFactors.txt' (Table_Read_Offset)
Component bc: curve=(0.00000 1.00000 1.00000) lcurve=(0.000 1.00000 1.00000)

Component bc: initialized
[Template_Johann_spec] Initialize
Component bc: starting up
[Template_Johann_spec] Initialize
Component bc: starting up
Component bc: curve=(0.00000 1.00000 1.00000) lcurve=(0.000 1.00000 1.00000)

Component bc: initialized
Component bc: curve=(0.00000 1.00000 1.00000) lcurve=(0.000 1.00000 1.00000)

Component bc: initialized
[Template_Johann_spec] Initialize
Component bc: starting up
[Template_Johann_spec] Initialize
Component bc: starting up
Component bc: curve=(0.00000 1.00000 1.00000) lcurve=(0.000 1.00000 1.00000)

Component bc: initialized
Component bc: curve=(0.00000 1.00000 1.00000) lcurve=(0.000 1.00000 1.00000)

Component bc: initialized
[Template_Johann_spec] Initialize
Component bc: starting up
[Template_Johann_spec] Initialize
Component bc: starting up
[Template_Johann_spec] Initialize
Component bc: starting up
Component bc: curve=(0.00000 1.00000 1.00000) lcurve=(0.000 1.00000 1.00000)

Component bc: initialized
Component bc: curve=(0.00000 1.00000 1.00000) lcurve=(0.000 1.00000 1.00000)

Component bc: initialized
Component bc: curve=(0.00000 1.00000 1.00000) lcurve=(0.000 1.00000 1.00000)

Component bc: initialized
[Template_Johann_spec] Initialize
Component bc: starting up
Component bc: curve=(0.00000 1.00000 1.00000) lcurve=(0.000 1.00000 1.00000)

Component bc: initialized
[Template_Johann_spec] Initialize
Component bc: starting up
Component bc: curve=(0.00000 1.00000 1.00000) lcurve=(0.000 1.00000 1.00000)

Component bc: initialized

Finally [Template_Johann_spec: 1]. Time: 4 [s] 

Finally [Template_Johann_spec: 1]. Time: 4 [s] 

Finally [Template_Johann_spec: 1]. Time: 4 [s] 

Finally [Template_Johann_spec: 1]. Time: 4 [s] 

Finally [Template_Johann_spec: 1]. Time: 4 [s] 

Save [Template_Johann_spec]
Detector: analyzer_psd_I=0.978884 analyzer_psd_ERR=0.000312871 analyzer_psd_N=9.78884e+06 "analyzer_psd.dat"
Detector: fpi_I=0.000113034 fpi_ERR=2.55145e-06 fpi_N=9.49439e+06 "fpi.dat"
Detector: det_I=0.000111387 det_ERR=2.53132e-06 det_N=9.35125e+06 "det.th"
Detector: det2_I=9.95511e-05 det2_ERR=2.38261e-06 det2_N=7.57616e+06 "det2.th_E"
Detector: det3_I=8.97459e-05 det3_ERR=2.25653e-06 det3_N=2.9803e+06 "det3.th_E"

Finally [Template_Johann_spec: 1]. Time: 4 [s] 

Finally [Template_Johann_spec: 1]. Time: 4 [s] 

Finally [Template_Johann_spec: 1]. Time: 4 [s] 

Finally [Template_Johann_spec: 1]. Time: 4 [s] 
Detector: det4_I=9.3076e-05 det4_ERR=2.30515e-06 det4_N=3.12824e+06 "det4.x_E"

Finally [Template_Johann_spec: 1]. Time: 5 [s] 
[n-62-29-31:06551] 9 more processes have sent help message help-mpi-btl-openib.txt / ib port not selected
[n-62-29-31:06551] Set MCA parameter "orte_base_help_aggregate" to 0 to see all help / error messages
[n-62-29-31:06551] 9 more processes have sent help message help-mpi-btl-openib.txt / error in device init
INFO: Placing instr file copy /zhome/89/0/38697/xTESTS/2022-12-01/McXtrace-1.x_CPU_MPICC_1e7/Template_Johann_spec/Template_Johann_spec.instr in dataset 1