INFO: Using directory: "1" INFO: Using existing c-file: ./Template_Johann_spec.c INFO: Using existing binary: ./Template_Johann_spec.out INFO: === INFO: Using system default number of mpirun -np processes -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: n-62-29-34 Local adapter: mlx4_0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: n-62-29-34 Local device: mlx4_0 -------------------------------------------------------------------------- Simulation 'Template_Johann_spec' (/zhome/89/0/38697/xTESTS/2022-03-01/McXtrace-1.x_CPU_MPICC_5e7/Template_Johann_spec/Template_Johann_spec.instr): running on 10 nodes (master is 'n-62-29-34', MPI version 3.1). [Template_Johann_spec] Initialize Component bc: starting up [Template_Johann_spec] Initialize Component bc: starting up [Template_Johann_spec] Initialize Component bc: curve=(0.00000 1.00000 1.00000) lcurve=(0.000 1.00000 1.00000) Component bc: initialized Component bc: starting up Component bc: curve=(0.00000 1.00000 1.00000) lcurve=(0.000 1.00000 1.00000) Component bc: initialized Opening input file '/zhome/89/0/38697/McXtrace/mcxtrace/1.x-dev/tools/Python/mxrun/../mccodelib/../../../data/Si.txt' (Table_Read_Offset) Opening input file '/zhome/89/0/38697/McXtrace/mcxtrace/1.x-dev/tools/Python/mxrun/../mccodelib/../../../data/FormFactors.txt' (Table_Read_Offset) [Template_Johann_spec] Initialize [Template_Johann_spec] Initialize Component bc: starting up Component bc: starting up [Template_Johann_spec] Initialize Component bc: starting up Component bc: curve=(0.00000 1.00000 1.00000) lcurve=(0.000 1.00000 1.00000) Component bc: initialized [Template_Johann_spec] Initialize Component bc: starting up [Template_Johann_spec] Initialize Component bc: starting up Component bc: curve=(0.00000 1.00000 1.00000) lcurve=(0.000 1.00000 1.00000) Component bc: initialized Component bc: curve=(0.00000 1.00000 1.00000) lcurve=(0.000 1.00000 1.00000) Component bc: initialized Component bc: curve=(0.00000 1.00000 1.00000) lcurve=(0.000 1.00000 1.00000) Component bc: initialized Component bc: curve=(0.00000 1.00000 1.00000) lcurve=(0.000 1.00000 1.00000) Component bc: curve=(0.00000 1.00000 1.00000) lcurve=(0.000 1.00000 1.00000) Component bc: initialized Component bc: initialized [Template_Johann_spec] Initialize Component bc: starting up Component bc: curve=(0.00000 1.00000 1.00000) lcurve=(0.000 1.00000 1.00000) Component bc: initialized [Template_Johann_spec] Initialize Component bc: starting up Component bc: curve=(0.00000 1.00000 1.00000) lcurve=(0.000 1.00000 1.00000) Component bc: initialized [n-62-29-34:16569] 9 more processes have sent help message help-mpi-btl-openib.txt / ib port not selected [n-62-29-34:16569] Set MCA parameter "orte_base_help_aggregate" to 0 to see all help / error messages [n-62-29-34:16569] 9 more processes have sent help message help-mpi-btl-openib.txt / error in device init Trace ETA 24 [s] % 44 Trace ETA 20 [s] % 52 Trace ETA 20 [s] % 52 Trace ETA 23 [s] % Trace ETA 20 [s] % 47 52 Trace ETA 20 [s] % 53 Trace ETA 20 [s] % 52 Trace ETA 24 [s] % 44 Trace ETA 20 [s] % 53 Trace ETA 20 [s] % 53 63 63 63 62 62 62 62 57 54 54 73 73 73 72 72 72 72 67 64 64 83 83 83 82 82 82 82 77 74 74 93 93 93 92 92 92 92 87 84 Finally [Template_Johann_spec: 1]. Time: 20 [s] 84 Finally [Template_Johann_spec: 1]. Time: 20 [s] Finally [Template_Johann_spec: 1]. Time: 20 [s] Finally [Template_Johann_spec: 1]. Time: 20 [s] 97 94 94 Finally [Template_Johann_spec: 1]. Time: 23 [s] Finally [Template_Johann_spec: 1]. Time: 23 [s] Finally [Template_Johann_spec: 1]. Time: 23 [s] Save [Template_Johann_spec] Detector: analyzer_psd_I=0.978885 analyzer_psd_ERR=0.00013992 analyzer_psd_N=4.89442e+07 "analyzer_psd.dat" Detector: fpi_I=0.000113664 fpi_ERR=1.1471e-06 fpi_N=4.74719e+07 "fpi.dat" Finally [Template_Johann_spec: 1]. Time: 24 [s] Detector: det_I=0.000111906 det_ERR=1.13774e-06 det_N=4.67558e+07 "det.th" Detector: det2_I=0.000101268 det2_ERR=1.08194e-06 det2_N=3.7883e+07 "det2.th_E" Detector: det3_I=9.20358e-05 det3_ERR=1.03118e-06 det3_N=1.49023e+07 "det3.th_E" Finally [Template_Johann_spec: 1]. Time: 24 [s] Detector: det4_I=9.45599e-05 det4_ERR=1.0457e-06 det4_N=1.56414e+07 "det4.x_E" Finally [Template_Johann_spec: 1]. Time: 24 [s] INFO: Placing instr file copy /zhome/89/0/38697/xTESTS/2022-03-01/McXtrace-1.x_CPU_MPICC_5e7/Template_Johann_spec/Template_Johann_spec.instr in dataset 1 loading system configuration loading override configuration from /zhome/89/0/38697/mxtest/mctest/../mccodelib/mcxtrace-test/McXtrace-1.x_CPU_MPICC/mccode_config.json